Canik has built a reputation for packing a lot of features into handguns without attaching the premium price tag that often comes with them. The METE SFT Pro takes that philosophy a step further by starting with the company’s full-size METE platform and adding a number of upgrades straight from the factory.
Chambered in 9mm, the METE SFT Pro has a 5-inch threaded barrel, an optics-ready slide, an 18+1 capacity, upgraded sights and a flat-faced 90-degree trigger. In other words, it comes out of the box with a number of features shooters frequently end up adding to pistols after the fact.
We’ll go over everything you need to make an informed opinion about this pistol.
- Range use, home defense and shooters who want a suppressor- and optics-ready full-size 9mm.
- This is a true full-size pistol, so its 5-inch threaded barrel and large grip favor shootability over easy concealed carry.
Canik METE SFT Pro Barrel
Right off the bat, one of the biggest differences between the standard METE SFT and this Pro model is the barrel.
There really isn’t much excuse anymore for a gun designed with this type of use in mind to not come threaded from the factory. Canik understood the assignment.
The METE SFT Pro comes with a 5-inch, chrome-plated, fluted barrel that is threaded 1/2x28. That makes it ready to accept the suppressor or other compatible muzzle device of your choice without having to swap barrels first.
Slide, Sights and Optics
Canik gave the pistol aggressive front and rear slide serrations along with additional machining cuts that give the Pro a noticeably different appearance from a standard METE SFT. They aren’t purely cosmetic, either. The additional surfaces give you plenty to grab when manipulating the slide.
On top are a Night Fision tritium front sight and a blacked-out, serrated rear sight. That combination puts your attention on the front sight rather than giving your eye three equally prominent dots to sort out.
The slide is also cut for an optic while retaining the ability to co-witness the iron sights, which aren’t exactly suppressor-height, but they’re darn close. With the VOID 9 suppressor, the front sight is right at the top apex of the suppressor, so it isn’t really an issue.
There is one detail worth paying attention to here because Canik changed the optic compatibility during production. Pistols with serial numbers after 25CY04801 are listed as compatible with RMR and RMS/RMSc-pattern optics, while earlier guns are listed for RMRcc and RMS/RMSc patterns. If you’re buying an optic specifically for this pistol, check the serial number before ordering.
RELATED:Canik Prime Radian 9mm Review: Tested With Four Loads and Rapid Fire
Full-Size Polymer Frame
The METE SFT Pro uses a full-size polymer frame with an accessory rail underneath that uses the familiar 1913 Picatinny pattern, opening the door for lights, lasers or other compatible accessories.
The pistol also comes with two alternate backstraps, allowing some adjustment to how the grip fills your hand.
Controls include a low-profile ambidextrous slide stop/release and a reversible magazine catch that is noticeably more prominent. Those ambidextrous and reversible controls make the pistol considerably more accommodating for left-handed shooters without requiring major modifications.
The slide stop/release is very low-profile, so you won’t accidentally get hung up on it, and the magazine catch is extra long, making it super easy to utilize when needed. It also has a strong enough spring that you are very unlikely to accidentally drop a mag.
METE SFT Pro Trigger
Canik triggers have developed a following of their own, and the METE SFT Pro gets a flat-faced trigger with a short-reset single-action design.
Because of the need to depress the trigger safety first, there’s a good bit of takeup before the trigger hits a defined wall, but the break is crisp and clean. The reset deserves mention, too, because it is nice and short.
Magazine Capacity and Included Accessories
The METE SFT Pro ships with two magazines: one 18-rounder and one extended 20-rounder. Standard capacity is therefore 18+1 and 20+1, giving you plenty of ammunition on board without immediately having to start buying extra magazines.
That also highlights something Canik does particularly well: The gun comes with a lot of stuff.
In addition to the two magazines, the factory package includes a hard case, magazine loader, alternate backstraps, two optic plates, reversible IWB/OWB holster, punch, toolkit, bore brush, patch rod, gun lock and manual.
You can argue about whether every included accessory will actually get used—gun locks usually end up in my circular file—but it’s certainly better than opening the box and immediately discovering another $100 worth of things you need to buy. Is the included holster the be-all and end-all? Not likely, but at least you’re ready to carry right out of the box.
Canik METE SFT Pro Range Test
Specs tell you what a gun is supposed to do. Range time tells you whether it actually does it.
All of the shooting was done on my private range, shooting unsupported with the factory sights and utilizing steel targets out to 25 yards. The ammo was 124-grain FMJ American Eagle from Federal, and the Canik VOID 9 suppressor was used for part of the time.
I didn’t have any issues or stoppages whether I was shooting fast or slow, suppressed or unsuppressed.
Recoil and muzzle flip were essentially non-existent, which is what we’ve come to expect from a full-size 9mm pistol. I performed a 19-round mag dump at 25 yards and kept all of the shots in an eight-inch circle.
Precision shooting wasn’t my goal here; all of the rounds fired during the entire range session were well within the “minute of man” measurement. I’m pretty sure Canik didn’t design this gun to be a precision competition tool, so I didn’t treat it as such.
The five-inch barrel and full-size grip give the shooter plenty of gun to work with, but that inevitably comes with a tradeoff. This gun isn’t pretending to be a pocket pistol.
If that’s what you’re after, keep looking; Canik has other options for that.
Shooting the METE SFT Pro Suppressed
One of the obvious benefits of that factory 1/2x28 threaded barrel is that the METE SFT Pro is suppressor-ready right out of the box, and I took full advantage of that by threading on a Canik VOID 9 suppressor. Canik’s built-in-the-USA suppressor lineup is the result of a collaboration with Otter Creek Labs.
The VOID 9 made an already enjoyable shooting session noticeably quieter and more pleasant. Made from Grade 5 titanium using additive manufacturing—3D printing, to the rest of us—the result is a 6-inch suppressor that weighs just 7.5 ounces.
Interchangeable vented end caps kept back pressure very low, and because it is made from lightweight titanium, I barely felt it on the end of the pistol.
Canik METE SFT Pro: Final Verdict
The METE SFT Pro is an interesting pistol because most of its selling points aren’t revolutionary by themselves. Threaded barrels exist. Optics-ready slides exist. Tritium sights, accessory rails, interchangeable backstraps, high-capacity magazines and upgraded triggers all exist.
The appeal is having all of them together from the factory for an MSRP of $624.99.
That puts the METE SFT Pro in an interesting position. Instead of buying a basic pistol and then replacing the barrel, sights, trigger and possibly other components, Canik has bundled most of those upgrades into one factory package.
This is unmistakably a full-size handgun. For someone whose primary concern is maximum concealability, it’s probably going to be more pistol than they want to carry around. For range use, home defense, suppressor use or someone who simply prefers a full-size handgun, those dimensions may be a non-issue.
The bottom line is that Canik has put together a pistol that includes many of the upgrades shooters routinely spend additional money adding to other handguns.
- Comes with everything a new gun owner could need, right out of the box
- Magazine capacity of 18 and 20 rounds is great
- Slide is cut for optics with adapters included and barrel is threaded
- Trigger is crisp with a very short reset
- Need to be mindful of the optic compatibility change, especially if buying used
- Product Origin
- Manufacturer sample
- Tested By
- Logan Metesh
- Test Type
- Range
- Test Date
- September 2026
- Test Location
- Middle Tennessee
- Test Duration
- One session
- Conditions
- Hot and humid
- Consumables
- 124-grain FMJ American Eagle from Federal
- Usage Volume
- 300 rounds
- Setup and Accessories
- VOID 9 suppressor
- Action
- Semi-automatic, striker-fired
- Barrel Length
- 5-inch threaded 1/2x28
- Overall Length
- 8.13 inches
- Caliber
- 9mm Luger
- Capacity
- 18+1 or 20+1
- Finish
- Black
- Weight
- 29.3 ounces (with an empty 18-round magazine and without the magwell)
- Sights
- Tritium front and black rear; optic-ready
- Frame
- Polymer
- MSRP
- $624.99
