Subscribe
advertisement
Archery

Hoyt Protocol AX 33 Review: From Paper Tune to an 80-Yard Soda Can

The Protocol AX 33 gives up a little speed for a friendlier draw—but that’s only part of the story. Follow the test from a three-shot paper tune to a four-shot hit on a soda can at 80 yards.

Part of the Hook & Barrel Bow Report series
Hoyt Protocol AX 33 Review: From Paper Tune to an 80-Yard Soda Can

For 2027, Hoyt is going for comfort. For this review, I tested the Protocol AX 33—the longer of the two aluminum models—from initial setup and tuning through an 80-yard soda-can challenge. It’s rated a little slower than the 2026 AX3-33, but that’s the price Hoyt paid for a more shoulder-friendly draw cycle. After the full test, I think that was a worthwhile trade.

If you bought last year’s flagship aluminum bow from Hoyt, you probably don’t need to trade it in for the Protocol AX 33. But if you passed on the AX3-33 and you’re looking for a smooth-drawing, long-range tack driver from Hoyt, then 2027 could be your year to buy.

The Protocol AX 33 measures 33 3/8 inches from axle to axle, which is 1/16 inch longer than last year’s bow. Its 6 9/16-inch brace height is 3/16 inch longer, and its IBO speed rating is 337 fps, compared with 340 fps for the AX3-33.

advertisement

The Protocol is clearly related to the AX3, but its numbers are just a hair different. A big reason for that is the new HBX Select Gen 4 cam.

Bowhunters who want the same general platform in a shorter, more maneuverable aluminum package can also consider the Protocol AX 31.

a Hoyt Protocol AX compound bow shown hoirzontally
The Protocol AX 33 measures 33 3/8 inches from axle to axle, which is 1/16 inch longer than last year’s bow.
Smooth Operator
Hoyt Archery Protocol AX 33
Protocol AX 33
8.0
Out of 10
The 2027 Hoyt Protocol AX33 is a 33-inch aluminum hunting bow built around comfort, stability and easy tuning.
Best for:
  • Any hunting or target shooting where you need to shoot long distances. This bow is big and holds steady at full draw for those longer shots.
  • Archers and bowhunters who want a bow that comes with a well-made and well-shaped grip. You don’t have to do anything to modify this grip. It’s great as is.
Know before you buy:
  • If you don’t like the draw cycle, you can buy ES modules – Even Smoother – which will draw much easier at the same poundage.
Jump to Final Verdict

A Familiar Cam with a More Comfortable Draw

Last year’s cam was the HBX Gen 4. For 2027, Hoyt carried the Gen 4 modules over to the HBX Select cam but tweaked the system to make the draw cycle smoother.

I wouldn’t call last year’s cam harsh. I would, however, call this year’s cam comfortable.

That distinction matters. The Protocol AX 33 isn’t trying to win the speed race at all costs. Hoyt gave up 3 fps in its published IBO rating to produce a bow that’s friendlier to draw, especially for hunters who shoot frequently or simply don’t want to fight their bow every time they pull it back.

But let’s be honest: If Hoyt can maintain the same HBX Gen 4 module system with the HBX Select cam, then the new cam isn’t terribly different from its previous iteration. A true makeover would necessitate new modules. This is essentially the same cam, refined to provide a more comfortable shooting experience.

a closeup of the cam of a Hoyt Protocol AX 33 compound bow
Hoyt’s HBX Select Cam returns for 2027, but the new Gen 4 mods create a noticeably smoother shooting experience.

ES Modules Make the Draw Even Smoother

If the standard cam still feels a little tough to draw, Hoyt now offers another option for its flagship bows: ES modules.

ES stands for “Even Smoother.” Mathews introduced its Z mods last year to soften the draw cycle of its bows, and Hoyt is following suit with the ES modules for 2027.

That added comfort comes with a speed penalty. My test bow lost 6 fps when switching from the standard G4 modules to the ES modules.

advertisement

Whether that trade is worthwhile depends on what you want from your bow. Some bowhunters will gladly surrender a few feet per second for an easier draw, especially in cold weather, from an awkward position or after sitting still in a tree for several hours. Others will want every bit of available speed and stick with the standard G4 modules.

The important thing is that Hoyt gives the shooter a choice.

a cropped closeup of the mod system on a compound bow
If the standard G4 modules still feel a little harsh, Hoyt is offering ES (Even Smoother) mods as an option on the new Protocol bows. Whether that trade is worthwhile depends on what you want from your bow.

How To Choose the Right Mod for Your Protocol

The short version: Choose ES if you prioritize a comfortable draw, a longer valley, and an expanding shot. Choose G4 if you prioritize maximum arrow performance, a firm back wall, and a pull-to-stop shooting style.

ConsiderationES MODSG4 MODS
Primary priorityDraw-cycle comfort over raw speedMaximum arrow velocity, kinetic energy, and momentum
Draw-weight flexibilityIdeal for archers who may otherwise lower their draw weight during the year; switching to the ES Mod provides a more comfortable alternativeBest for archers who want to retain the more performance-oriented setup
Comfort vs. performanceDelivers the comfort of a lower-draw-weight bow with the performance of a higher-draw-weight bowPrioritizes maximum performance over draw-cycle comfort
Shot executionSuits archers who prefer an expanding shot and follow-throughSuits archers who pull to a firm stop at full draw, with no movement or sponginess in the wall
At full drawLonger valley and standard back-wall settingFirm wall for archers who anchor hard but want to avoid low dips while aiming
Bow setupWell suited to lighter-mass bowsWell suited to heavier-mass bows or bows equipped with longer stabilizers
Aiming benefitCan help lighter bows aim more steadily through the combined leverage of the standard back-wall setting, longer valley, and front weightSupports a firm, performance-focused aiming and anchoring style

The Riser Looks Familiar, Too

A similar statement can be made about the riser. The Protocol AX 33’s riser is a tweaked version of the AX3-33 riser rather than a ground-up redesign.

advertisement
advertisement

The most noticeable additions are sections of material near the top and bottom that I would call “wings.” Their main purpose is to move the quiver connection point back toward the cams, which is a more desirable position.

Pushing the quiver rearward and away from the front of the bow improves its balance when shooting with the quiver attached. That might not sound like a dramatic change, but it addresses something bowhunters actually feel in the field. A fully loaded quiver can pull a bow off balance, and moving that weight closer to the bow’s center helps reduce its influence at full draw.

a cropped closeup of the center of the riser on a compound bow
The Protocol rise has a few changes from 2026 model bows, but the signature Hoyt bridge is still present.

Is the Protocol AX 33 Heavy?

As far as 33-inch aluminum bows go, the Protocol AX 33 is on the heavy side.

advertisement

I wouldn’t say it feels heavy, but it weighs more than most comparable aluminum bows of this length. Hoyt lists the bow at 4.7 pounds, while my test bow weighed 4.835 pounds without accessories.

Hunters who like the Protocol platform but prioritize lower mass weight can look to Hoyt’s carbon-riser alternatives: the 3.97-pound Protocol RX29 and the 4.17-pound Protocol RX Ultra.

For comparison, the Mathews ARC Apex 35 is almost an inch longer, yet it weighs 4.7 pounds.

Still, I’m not here to suggest that 4.835 pounds is truly heavy for a 33-inch compound bow. Compound hunting bows regularly weighed 6 pounds 20 years ago. There are lighter aluminum bows on the market, but you won’t feel like you’re carrying a boat anchor when hauling the Protocol AX 33 into the backcountry.

advertisement

That extra mass also has a benefit on the range: It can help the bow settle down and hold steadily at full draw.

a cropped photo showing a hutner from the chest down as he holds a compound bow in his left hand while presumably looking down at a large whitetail buck he just harvested.
At 4.835 pounds on our scale, the Protocol AX33 carries more mass than several comparable aluminum flagships. That weight helped it settle at full draw—a welcome trait when a whitetail steps into range.

XTS Tuning Returns for 2027

Hoyt introduced its XTS Tuning System last year, and it carries over to the Protocol AX 33 for 2027.

advertisement

XTS is Hoyt’s unique press-free tuning system. It allows the shooter to adjust the bow directly on the shooting line without using a bow press. Hoyt was one of the last major bow manufacturers to offer a press-free tuning system, but this one was worth the wait.

With XTS, the shooter applies or releases pressure at the limb tips through controls in the limb pockets. Those adjustments shift the cams left or right, depending on where pressure is added or released.

advertisement

When I shot my test bow through paper, I got a nock-right tear. I turned the bow around so the top limb pocket faced me, then turned the XTS control bolt on the right limb two full turns clockwise. That increased the pressure on the limb.

a closeup of the XTS tuning system on a Hoyt compound bow limb pocket.
XTS is Hoyt’s unique press-free tuning system. It allows the shooter to adjust the bow directly on the shooting line without using a bow press.

I moved to the left limb and turned its control bolt two turns counterclockwise, then made the same adjustments to the bottom limbs.

The net effect shifted the cams to the right. That cleaned up the paper tear and produced a perfect bullet hole.

It took me three shots to get a perfect tune, and I never left the shooting line. Hoyt’s XTS system is simple, responsive and genuinely useful.

Setting Up the Hoyt Protocol AX 33

My testing began with a new Protocol AX 33 still in the box. It arrived with a No. 4 Gen 4 module installed, providing a peak draw length of 30 inches.

advertisement

I removed the bow, inspected it from top to bottom and found everything in perfect order. The fit and finish were flawless.

Next, I began the build. I added a rest, sight, peep and stabilizer before tying in a D-loop and checking the cam timing.

The timing was spot-on out of the box. No adjustments were needed.

After the paper-tuning process described above, it was time to sight in the bow.

P.J. Reilly holds a compound bow at full draw in preparation to shoot. The photo is shot at an upward angle as though from the ground.
P.J.’s test bow arrived in perfect time out of the box. A few quick adjustments via the XTS tuning system had the Protocol shooting perfect bullet holes in no time.

Solid and Steady at Full Draw

At 20 yards, I quickly got a sense of how solidly the Protocol AX 33 aims.

advertisement

My pin locked onto the gold center of a Vegas 40-centimeter target face. After a few sight adjustments, I stacked three arrows into the center 10-ring, with two of those arrows hitting the extra-middle X-ring.

advertisement

My stabilizer setup consisted of a 10-inch bar with 2 ounces on the end, mounted in the bushing directly under the grip. I also installed the Hoyt Short Stop 2.0 vibration dampener in the lower stabilizer bushing, which added another couple of ounces.

I don’t like piling weight onto a hunting bow just to make it aim well. The overall mass of the Protocol AX 33, combined with the modest amount of stabilizer weight under the grip, was enough to make the bow stand upright and hold steadily at full draw.

In this case, the bow’s above-average mass worked in its favor.

a Vegas-style archery target with three arrows tightly grouped in the center bullseye. A Hoyt Protocol bow stands leaning against the target next to the arrows.
It took only a few arrows at 20 yards before P.J. was ready to move farther back to test the Protocol with more challenging shots.

Draw Cycle, Letoff and Back Wall

I shot repeatedly from 30 to 80 yards while building a sight tape, which gave me plenty of time to immerse myself in the shooting experience.

advertisement

For this portion of the test, I didn’t use the ES modules. Instead, I turned the bow down from 70 pounds to 66 pounds and shot it with the standard G4 modules.

The bow drew and aimed nicely.

With the HBX Gen 4 modules, the shooter can choose among 75, 80 and 85 percent letoff settings. The module “shoes”—the pieces at the very ends of the modules—can also be flipped from top to bottom. That changes the back wall from “hard” to “extra hard,” or vice versa.

I prefer the extra-hard setting because it allows me to lock everything in place while aiming. Archers who prefer a little more movement at full draw might choose the hard setting instead.

a man at full draw prepares to shoot a compound bow
One thing that stood out while P.J. was shooting at distance was the arrow flight. He said it was flawless. He also praised the grip as “...one of the best stock grips on the market.”

Excellent Arrow Flight at Long Range

One thing that stood out while I was shooting at distance was the arrow flight. It was flawless.

advertisement
advertisement

Hoyt makes one of the best stock grips on the market, and the flight of my arrows showed just how consistently I could position my hand. I know I have a tendency to torque bows, but the Hoyt grip helps negate that action.

My arrows flew like darts, with no visible fishtailing.

That kind of clean arrow flight builds confidence at longer ranges. When an arrow leaves the bow without any visible kick or wobble, it becomes easier to trust that the shot will land where the pin was sitting when the release broke.

There are multiple setup considerations for shooting longer distances, but the confidence that leads to consistent accuracy comes largely from a bow that launches a perfect arrow.

P.J. Reilly prepares to launch an arrow from a Hoyt Protocol AX 33 bow at what is surely a longer distance based on the upward angle of his aim.
The Protocol stands out during longer-distance shooting, where its flawless arrow flight and stable feel in the hand lend themselves to extra confidence for the shooter.

Nearly Dead in the Hand

At the shot, the Protocol AX 33 produced a minimal amount of vibration.

advertisement

I could feel it, so I wouldn’t call the bow completely “dead in the hand.” But it’s pretty darn close.

The small amount of feedback I felt was certainly nothing alarming, and it didn’t interfere with the shooting experience. There was no harsh jump, buzz or reaction that made me want to start adding accessories simply to tame the bow.

READ HOOK & BARREL’S BOW SEASON BLUEPRINT:

The 80-Yard Soda-Can Test

My final test, after completing the sighting-in process, was trying to hit the bottom of a soda can at 80 yards.

It took me four shots.

I can’t say the group was super tight, but I essentially walked the arrows into the can from left to right with each shot. My impacts were consistent with where the pin sat on the target, and needing only four shots to hit the bottom of a soda can at 80 yards is nothing to sneeze at.

advertisement
advertisement

From my perspective, the bow did its job on the range. I would imagine the more time I spent with it, the tighter my shooting would become.

a successful bowhunter carrying his bow in his left hand hikes out of the woods carrying a huge bull elk head and antlers in a pack on his back.
The Protocol AX 33 makes the most sense for a bowhunter who wants a stable, smooth-drawing aluminum bow and values the shooting experience more than a few extra feet per second.

Other 2027 Hoyt Protocol Bows

The AX33 is one of four primary bows in Hoyt’s 2027 Protocol family. The lineup includes two aluminum-riser AX models and two lighter carbon-riser RX models.

MODELRISERBEST SUITED FOR
Protocol AX31AluminumHunters wanting a shorter, more maneuverable bow for tree stands, saddles and ground blinds
Protocol AX33AluminumArchers prioritizing stability, versatility and longer-range shooting
Protocol RX29CarbonHunters seeking a compact bow with lower mass weight
Protocol RX UltraCarbonArchers wanting carbon construction with a longer, steadier platform

Hoyt also offers specialized short-draw and long-draw configurations for archers at either end of the draw-length spectrum. Across the family, the bows share major components and technologies, including the HBX Select cam system, G4 and ES module options, XTS press-free tuning and In-Line accessory connections.

advertisement

Who Should Buy the Hoyt Protocol AX 33?

The Protocol AX 33 makes the most sense for a bowhunter who wants a stable, smooth-drawing aluminum bow and values the shooting experience more than a few extra feet per second.

It should appeal especially to archers who:

  • Want a more comfortable draw cycle without dropping to a significantly lower draw weight
  • Prefer a longer, steadier aluminum hunting bow
  • Shoot with their quiver attached and care about bow balance
  • Want the convenience of press-free tuning
  • Appreciate adjustable letoff and back-wall settings
  • Prioritize consistent arrow flight and long-range accuracy over maximum advertised speed

If you already own an AX3-33, there probably isn’t enough here to justify trading it in. The Protocol AX 33 is an evolution of that platform—not a total reinvention.

For anyone coming from an older Hoyt or shopping for a new flagship aluminum bow, however, the Protocol offers a compelling mix of comfort, stability, tuning convenience and downrange performance.

a successful whitetail hunter holds up the head of a buck he just harvested. His bow stands nearby to the left.
For anyone upgrading from an older Hoyt or shopping for a new flagship aluminum bow, the Protocol AX33 blends comfort, stability, easy tuning and downrange performance for the whitetail woods, open-country hunts and the 3D range.

Hoyt Protocol AX 33 Review: The Final Verdict

The Protocol AX 33 has all the characteristics I look for in a sweet-shooting bow: a comfortable draw cycle, a solid hold, excellent arrow flight and impacts that match what I see through the sight.

It isn’t the lightest aluminum bow in its class, and it isn’t the fastest. Nor is it a dramatic departure from the AX3-33.

But it doesn’t need to be.

Hoyt took an already capable platform and made it more comfortable to shoot. The standard G4 modules provide plenty of performance, while the optional ES modules give archers a way to soften the draw even further. XTS makes tuning quick and convenient, and the updated quiver position improves the bow’s balance where it matters.

The Protocol AX 33 drew well, aimed steadily and put arrows where my pin told them to go—even at 80 yards. For a hunting bow, that’s the job.

And the Protocol AX 33 does it very well.

Smooth Operator
Hoyt Archery Protocol AX 33
Protocol AX 33 (1 of 3)
Protocol AX 33 (2 of 3)
Protocol AX 33 (3 of 3)
Check prices at...
Affiliate disclosure: We may earn a modest commission at no extra cost to you
8.0
Out of 10
Very Good
Accuracy
8.0
No complaints with this bow shooting short range or long. It did what it’s supposed to do.
Shootability
7.0
This bow draws nice and aims nice. No complaints. The back wall is solid and comfortable. Minimal vibration at the shot…nothing that made me take notice to it. What knocked it down from “excellent” is the weight. So far through the launches, this is the heaviest aluminum bow for this length. The weight isn’t cumbersome, but we have to acknowledge it’s the heaviest for this category.
Tunability
7.5
The XTS Tuning System is super responsive and simple to use with no bow press required. Draw weight and draw length are easily adjusted. What knock the score down from “excellent” is the module system. The HBX Gen 4 modules allow you to adjust down from the peak draw weight three positions, in quarter-inch increments. So if you get a module and realize you need to increase the draw length slightly from the peak, you either have to buy new modules or you have to put the bow in a press and twist cables.
Aesthetics
9.0
Good looking bow that looks and feels well made and like it will get the job done.
Build Quality
9.0
Everything looked in perfect order out of the box and after shooting many, many dozens of arrows, it still was in great shape.
Value
6.5
At $1,599, this bow is priced at the top of the spectrum for aluminum bows of this length. It’s a quality, well-made bow, for sure, but it’s priced at the top of this category.
Pros
  • Between the riser length, the signature Hoyt bridge and the new riser design, which combine to help this bow aim super solid, this is a great choice for long-distance shooting.
  • The grip is one of the best stock grips in the game. It’s comfortable, repeatable and warm in cold weather.
  • The addition of the new ES modules allows you to make this bow draw super smooth.
Cons
  • It’s the heaviest aluminum bow of this length that we’ve seen so far for 2027.
  • The module system is great for tweaking your draw length – unless you need to tweak it a bit over the longest length.
Product Origin
Manufacturer sample
Tested By
P.J. Reilly
Test Type
Multiple sessions, indoors and out, 20-80 yards
Arrows Fired
Many dozens
Test Setup
Draw weight was 70 lbs. with 85% letoff for getting arrow speed, then 66 lbs. at 85% letoff for all other shooting. Draw length was 30 inches.
Arrow
UV 1K, 300 spine, 100-grain point, 470.6 grains total arrow weight; for speed test, Easton Sonic, 300 spine at a total weight of 350 grains
Instrumentation
Garmin C1 chronograph and Last Chance Archery hand scale
Accessories
HHA Nytryx Pro sight, QAD MX-2 arrow rest, Conquest 3K 10-inch
Setup Performed By
P.J. Reilly
Axle-to Axle
33 3/8 inches
Weight
4.7 pounds; tested weight 4.835 pounds
Speed
IBO 337 fps; tested at 332 fps
Draw Weight
Peak weights of 50, 60, 65, 70, 75 and 80 pounds
Draw Length
26-31 inches
Brace Height
6 9/16 inches
Cam System
HBX Select
Letoff
75%, 80% or 85%
Finish Options
Multiple colors and camouflage patterns for both limbs and riser
MSRP
$1,599

advertisement