I’ve become so used to the “new and improved” approach to outdoor gear that I sometimes forget the previous gear performed, too. In many cases, it performed damned well—and still does today.
For example …
I opened the box containing Excalibur Crossbows’ 2026 Suppressor CRT and immediately noticed the limbs. They were recurves. Old-fashioned-looking recurves.
That threw me.
I’m used to crossbows featuring relatively short reverse-draw limbs, high-tech cams and super-tensioned cables crisscrossing the frame. My first reaction to the Suppressor CRT was, “Man, that’s real old school. Hope it works!”
It does.
The Suppressor CRT proved to be a quality crossbow. It was very accurate, featured a great trigger and quality scope, and fit my shoulder nicely. It did all this at roughly half the price of some premium cam-and-cable crossbows.


- Deer hunters who want quiet, dependable accuracy and recurve simplicity without the price of a premium cam-and-cable crossbow.
- Our tester much preferred the Charger EXT hand crank system for cocking; a $248 add-on accessory
What Comes with the Excalibur Suppressor CRT?
The Suppressor CRT requires minimal assembly.
The main job is simply sliding the barrel nut into the hole in the front section of the mainframe, attaching and aligning the riser assembly with the stock, and then securing the riser with the included flathead screw and Allen key.
Once that’s done, the Suppressor CRT is nearly ready to shoot.
The package includes a Rebolt four-arrow quiver and the hardware needed to mount it to the bow. I opted not to install the quiver because I test crossbows from a sandbagged rest, and quivers tend to get in the way.
The package also includes four ProFlight 16.5-inch arrows with 100-grain field points. The total measured weight of each arrow and field point was approximately 358 grains.
A CeaseFire rope cocking aid, TACT Hunter Scope with mounting hardware and an owner’s manual round out the package.

Compact, Quiet and Good-Looking
The Suppressor CRT measures 31.7 inches long and weighs 6.2 pounds without accessories. When cocked, the crossbow measures 21.5 inches from tip to tip. Its draw length is 14 5/8 inches.
Excalibur equipped the Suppressor CRT with several sound- and vibration-deadening components. Its Sound Deadening System+ incorporates LimbSaver SlipLox limb dampeners, string stars and stirrup dampeners. The bow also features R.E.D.S. suppressors.
According to Excalibur, the complete system produces 35% less noise and 65% less vibration than the bare crossbow.
It’s tough to judge how quiet a crossbow is when your head is right up against it. However, a friend standing 10 yards away told me he heard only a faint twang when I fired an arrow.
Throughout my shooting, the Suppressor’s clean-breaking trigger operated much like a quality rifle trigger. Impressive.
The limbs, frame and stock wear Mossy Oak Break-Up Country camouflage. The stock’s thumbhole design provided a comfortable, solid grip.

CeaseFire Safety Technology
The Suppressor CRT features Excalibur’s CeaseFire anti-dry-fire technology. The crossbow will not fire unless an arrow is loaded, the safety is off and the trigger is pulled.
If any one of those three requirements is missing, it’s a no-go.
I received an early lesson in that system when I thought I had fully cocked the Suppressor. I loaded an arrow, aimed and tried to pull the trigger.
The trigger wouldn’t move.
When I examined the bow, I saw that the string wasn’t fully seated behind the nock holder. I cocked the crossbow another third of an inch and got the string completely into position. This time, I heard the needed click.
Now I was ready to fire.

TACT Hunter Scope and Cocking Options
I fitted the TACT Hunter Scope with the included 30mm rings and easily attached it to the bow’s full-length Picatinny optics rail.
The illuminated reticle offered red and green settings. It featured a 20-yard center dot, with a series of small triangles below it identifying the 30-, 40-, 50- and 60-yard aiming points.
Then I tried the included rope cocking aid.
It didn’t work for me.
I shortened the rope to gain some leverage but still couldn’t cock the crossbow. Instead of running myself down—“Sissy! You need more time at the gym!” and so forth—I accepted reality and requested Excalibur’s Charger EXT hand-crank system.
The unit attached to the butt of the crossbow, and the handle snapped into place. To cock the bow, I pressed the release tab, pulled down the rope and string hooks, and attached the hooks to the string. Then I pressed the “Push to Cock” tab and turned the handle approximately 10 times.
The string came all the way back, and I heard the click.
Much better.

Zeroing the Suppressor CRT at 20 Yards
Excalibur’s instructions recommend beginning at 20 yards, making the necessary adjustments, establishing a tight group and then moving to longer distances.
For a target, I used my SPYDERWEB No Speed Limit ST 18 XL archery target. It has stopped every arrow I’ve launched at it during the last two years while still allowing easy arrow removal.
My initial arrows struck a couple of inches high and to the left. The first scope adjustments didn’t move the impacts much, so I used a routine that has helped me with new scopes in the past: I turned both the elevation and windage controls forward several clicks, returned them the same number of clicks, and repeated the process.
After that, the adjustments produced more predictable changes.
I placed three arrows just above the bullseye, with the shafts clustered within an area about the size of a nickel. I made one final downward elevation adjustment, and my last two arrows struck slightly above the center of the bullseye.

Suppressor CRT Speed Test
While establishing the 20-yard zero, I used a Garmin Xero C1 Pro chronograph to measure arrow speed.
The arrows averaged exactly 361.0 feet per second. The Suppressor CRT is rated for speeds of up to 370 fps, so my test bow came quite close to its advertised velocity.
The TACT Hunter Scope features an adjustable speed ring forward of the ocular lens. After reviewing the chronograph readings, I moved that ring down from the 370-fps setting to what I estimated was the 361-fps mark.
Accuracy at 30 Yards
By the time I moved to 30 yards, I had become much more comfortable with the Suppressor. I appreciated the trigger and had developed confidence in the scope.
I fired two three-arrow groups. Both centered on the bullseye.
The first measured 1.5 inches. The second—and best—measured exactly 1 inch.
Not too shabby!

Stretching the Suppressor CRT to 50 Yards
I moved next to 50 yards and fired two more three-arrow groups.
The arrows formed a nice 2-inch group, but they struck at least 2.25 to 2.5 inches high. Three arrows also landed approximately an inch left of the bullseye’s center.
While I was shooting, a steady breeze had kicked up. It came from behind and to my right, moving toward the left.
Had the wind lifted and pushed my arrows?
I returned two days later to find out. This time, the air was still.
A Windless 50-Yard Retest
I first placed the SPYDERWEB target at 30 yards and fired one arrow to confirm my zero.
The arrow center-punched the bullseye.
I moved the target back another 20 yards and fired two arrows using the scope’s 50-yard aiming point. Both struck high—not quite as high as the arrows fired on the windy day, but approximately 2 inches above the bullseye and correctly centered from left to right.
If I were going to hunt with the Suppressor CRT, I’d leave the scope settings where they were. I would simply remember that my arrows struck approximately an inch high at 40 yards and 2 inches high at 50 yards with this setup.
Although the scope provides a 60-yard aiming point, 50 yards is my maximum ethical hunting distance for deer-sized game.

Is the Excalibur Suppressor CRT Hunt-Ready?
Pretty much right out of the box, the Suppressor CRT is ready for the deer woods.
It has the power and accuracy needed for ethical, efficient hunting. It offers a crisp trigger, a capable illuminated scope, an effective sound-deadening system and the field-serviceable simplicity of a recurve design.
It also carries an MSRP of $1,199.99. That certainly isn’t pocket change, but hunters can spend nearly twice as much on some premium crossbows loaded with cams, cables and other moving parts.
The Suppressor CRT looks old school. Its performance isn’t.
From 20 to 50 yards, the deer truly won’t know the difference.
- Recurve system is easier on strings than cam systems.
- Very crisp, rifle-like trigger.
- Comfortable on the shoulder.
- Balances nicely offhand.
- For our tester, cocking rope was strenuous to use.
- Product Origin
- Manufacturer Sample
- Tested By
- Brian McCombie
- Test Type
- Shooting range; sandbagged bench and off-hand
- Test Date
- Early November, 2026
- Test Location
- North-central Wisconsin
- Test Duration
- Two sessions, 4.5 hours total
- Conditions
- Mid- to upper 30s, partly cloudy, some wind
- Consumables Used
- Excalibur included Pro-Flight 16.5 Arrows and field tips
- Usage Volume
- Approximately 24 arrows launched
- Accessories
- Charger EXT hand crank system added
- FPS
- Up to 370 advertised; 361 actual test result
- Width Cocked
- 21.5 inches tip-to-tip
- Length
- 31.7 inches
- Weight
- 6.2 pounds bare bow
- Optics Base
- Full length Picatinny rail.
- Safety
- Two-position
- Included in Package
- 4 arrows, 4 field tips, Ceasefire cocking rope, TACT Hunter Scope and hardware, 4-arrow quiver and hardware, owner’s manual.
- MSRP
- $1,199.99






